V-belt Optibelt 17 x 2800 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 2800 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 2800 Li and any equivalents.
The Optibelt VB S=C Plus 17 x 2800 Li is a classical V-belt with a B profile, a 17 mm top width, an 11 mm height and a 40-degree angle. Its 2800 mm length makes it a candidate for drives where a long, standard cross-section belt is required. Before you fit it, inspect the drive so the new belt is not damaged by worn components.
Check sheave grooves for wear, rust or embedded debris. Worn grooves can let a new belt sit too deep, which reduces grip and shortens belt life. Confirm that sheaves are aligned and that the belt will run straight in the grooves. Also check bearings, shafts and guards for anything that could rub or misalign the belt.
Verify the part number on the old belt and compare it with the profile, top width and length shown here. The marking 17 x 2800 Li identifies the cross-section and the length in millimeters. If the old belt is stretched, glazed or cracked, replace it before it fails. When a drive uses multiple belts, fit a complete matched set so the load is shared evenly.
To request a quote, send the part number 17 x 2800 Li, the quantity and any drive details you have. If you are unsure about the profile or length, send a photo of the belt marking and the sheave dimensions. The team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 2800mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, rust or debris, and confirm that sheaves are aligned. Check bearings and guards for anything that could rub the belt. Correct any issues before fitting the new belt.
- How do I identify the belt I need?
- Look for the marking on the back of the old belt. This belt is marked 17 x 2800 Li, which corresponds to a B profile with a 17 mm top width and a 2800 mm length. If the marking is unclear, measure the top width and the outside length.
- Can you help confirm the right belt for my drive?
- Yes. Send the part number, the quantity and any drive details you have. A photo of the old belt marking and the sheave dimensions also helps. The team can confirm the belt or suggest an equivalent.