V-belt Optibelt 17 x 2750 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 2750 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 2750 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt with a B profile, a top width of 17 mm, a height of 11 mm, and a 40-degree angle. Its datum length is 2750 mm. Before you fit this belt, inspect the drive and sheaves.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves can let a new belt sit too deep, which leads to slip and heat. Verify that sheaves are aligned and that the driven equipment turns freely by hand. Confirm the belt marking on the old belt matches 17 x 2750 Li before ordering.
When you replace a belt, examine the entire drive. Look for oil or grease on sheaves, loose mounting bolts, and damaged guards. If the drive uses multiple belts, replace them as a set so the load stays even. A clean, aligned drive helps the new belt run at its intended tension and last longer.
For a quote, send the part number 17 x 2750 Li, the Optibelt series VB S=C Plus, and the quantity you need. If you are unsure about the profile or length, include a photo of the belt marking and the sheave dimensions. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 2750mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or debris, and verify alignment. Make sure the driven equipment turns freely and that guards and mounting bolts are secure. Correct any issues before fitting the new belt.
- How do I identify the correct replacement belt?
- Look for the marking on the back of the old belt. This belt is marked 17 x 2750 Li, with a B profile. If the marking is worn, measure the top width and datum length, or send a photo of the belt and sheaves for confirmation.
- What information do you need to quote this belt?
- Send the part number 17 x 2750 Li, the brand Optibelt, and the quantity required. If you need help confirming the profile or length, include the sheave dimensions and a photo of the old belt marking.