V-belt Optibelt 17 x 2718 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 2718 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 2718 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt in profile B, with a 17 mm top width, 11 mm height and a 40-degree angle. The code 17 x 2718 Li identifies the profile and the length, so you can compare it directly against the belt you are replacing.
The profile sets how the belt sits in the pulley groove. The B profile here is 17 mm across the top and 11 mm high, with a 40-degree angle. The length is 2718 mm. Check both against the old belt before you order, because a belt that is too wide or too long will not run correctly in the drive.
The marking on the back of the belt is the fastest way to confirm the match. Look for the Optibelt name, VB S=C Plus and the code 17 x 2718 Li. If the marking is worn off, measure the top width, the height and the length of the old belt and send those numbers with your request.
For a quote, send the part number 17 x 2718 Li, the quantity you need and any details from the drive nameplate. If you are replacing more than one belt on the same drive, list the full set so we can confirm the right belt for each position.
Dimensions
- Section
- B
- Length
- 2718mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile is B, which is 17 mm across the top and 11 mm high, with a 40-degree angle. The length is 2718 mm. These three values are what you match to the pulley groove and the drive layout.
- How do I confirm this is the belt on my drive?
- Read the marking on the back of the old belt and look for Optibelt, VB S=C Plus and 17 x 2718 Li. If the marking is not readable, measure the top width, the height and the length and send those values.
- What should I send to request a quote?
- Send the part number 17 x 2718 Li, the quantity, and the drive details you have. If the drive uses several belts, include the full set so each position can be confirmed.