Timing belt Optibelt 1016 8MHP SL 500
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1016 8MHP SL 500 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1016 8MHP SL 500 and any equivalents.
The Optibelt 1016 8MHP SL 500 is a timing belt in the Omega HP series. It has an HTD 8M profile, a length of 1016 mm and a pitch of 8 mm. Read the marking on the back of your old belt and match these values before you order.
The marking on a timing belt usually carries the profile and the length. On this belt the profile is HTD 8M and the length is 1016 mm, with a pitch of 8 mm. If the back of the old belt reads 1016 8MHP SL 500, this is the same part number. If the marking is worn or unreadable, measure the drive and compare the profile and length to the values above.
Timing belts are often replaced as part of scheduled drive maintenance. Inspect the pulleys for wear, check the belt for cracking or missing teeth, and confirm the tension is set to the drive manufacturer's specification. When a drive uses more than one belt, replace them as a set so the load stays even across the belts.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1016mm
Frequently asked questions
- How do I confirm this belt matches my drive?
- Read the marking on the back of the old belt. The profile should be HTD 8M and the length should be 1016 mm. The part number on the belt is 1016 8MHP SL 500.
- What information do I need to request a quote?
- Send the part number 1016 8MHP SL 500, or the profile and length from the old belt marking, by WhatsApp or email. Our team will confirm the belt and reply promptly.
- Can you help if the marking on my belt is unreadable?
- Yes. Send photos of the belt and the drive, along with the profile and length if you can measure them. We will help confirm the right timing belt for the application.