Timing belt Optibelt 1016 8M 20

OPTIBELT 1016 8M 20 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1016 8M 20 and any equivalents.

The Optibelt Omega 1016 8M 20 is a timing belt with an HTD 8M profile, a 1016 mm length and an 8 mm pitch. To match it to the belt you are replacing, read the marking on the back of the old belt and compare the profile and length directly.

Start by locating the original belt marking. The code 1016 8M 20 identifies the length, profile and width in the Optibelt Omega line. Confirm the profile is HTD 8M and the length is 1016 mm. The 8 mm pitch is fixed by the HTD 8M profile. If the old belt is worn or the marking is unreadable, measure the pitch length and the width across the back, then compare those figures with the data above.

A timing belt must match the pulley grooves and the drive length exactly. A belt with a different profile or length will not seat correctly or maintain the required timing. Before ordering, inspect the pulleys for worn teeth, check the tensioner and idler bearings, and look for oil or debris in the drive. If the drive runs more than one belt, replace all belts at the same time so the load is shared evenly.

When you request a quote, send the complete part number 1016 8M 20 and the quantity you need. If you are unsure whether this is the correct belt, send a photo of the old belt marking and the pulley teeth. Our team can confirm the profile and length or suggest an equivalent from the Optibelt Omega range.