Timing belt Optibelt 1016 8MHP 50

OPTIBELT 1016 8MHP 50 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1016 8MHP 50 and any equivalents.

The Optibelt 1016 8MHP 50 is an Omega HP timing belt with an HTD 8M profile, a 1016 mm length and an 8 mm pitch. If you are replacing a worn belt, start by reading the marking on its back: that string is what identifies the belt you need. Match it to this part number, or send us the marking and we will confirm the belt for your drive.

Reading the old belt is the most reliable way to get the right replacement. Look for the part number printed on the back, along with the profile and length. On this Optibelt belt the marking identifies an HTD 8M profile, a 1016 mm length and an 8 mm pitch. If the printing has worn off, measure the belt and note the tooth profile so we can cross-check it against the drive.

The 1016 8MHP 50 is a timing belt, also called a synchronous belt, used where the drive needs exact rotational timing between shafts. The HTD 8M profile and 1016 mm length are the key dimensions to verify before ordering. Check the pulleys for worn teeth, proper alignment and correct tension, and replace the belt if you see cracking, missing teeth or exposed cord.

For a quote, send the part number 1016 8MHP 50 by WhatsApp or email. If you are unsure, send a photo of the marking on the old belt and the pulley tooth count. We carry Optibelt belts and can help confirm the right belt or suggest an equivalent.