Timing belt Optibelt 100 AT20 / 9800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 AT20 / 9800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 AT20 / 9800 AFX and any equivalents.
The Optibelt 100 AT20 / 9800 AFX is an Alpha Flex timing belt with an AT20 profile, a 9800 mm length and a 20 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the start.
Check the sheaves for worn grooves, burrs or buildup that can damage the belt. Confirm the shafts turn freely and that the bearings have no play. Verify alignment and tensioner movement, because a drive that is out of line will shorten the life of any timing belt.
The AT20 profile and 9800 mm length identify this belt. Read the marking on the back of the old belt and compare it with the part number on this page. If the marking matches, the 100 AT20 / 9800 AFX is the correct replacement.
Send the part number 100 AT20 / 9800 AFX by WhatsApp or email to request a quote. If you are unsure about the profile or length, include the old belt marking and a photo of the drive, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 9800mm
Frequently asked questions
- What checks should I do before fitting this timing belt?
- Inspect the sheaves for wear, burrs or buildup, check that the shafts turn freely and the bearings have no play, and verify alignment and tensioner movement. Correcting these points first helps the new belt run properly.
- How do I confirm the 100 AT20 / 9800 AFX is the right belt?
- Compare the marking on the back of your old belt with the part number and the AT20 profile, 9800 mm length and 20 mm pitch shown here. If they match, it is the correct replacement.
- What should I send to request a quote?
- Send the part number 100 AT20 / 9800 AFX by WhatsApp or email. If you are unsure, include the old belt marking and a photo of the drive so we can help confirm the right belt or suggest an equivalent.