Timing belt Optibelt 100 AT20 / 9600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 AT20 / 9600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 AT20 / 9600 AFX and any equivalents.
When you need to replace a timing belt, the marking on the back of the old belt is the fastest way to identify the correct part. This page covers the Optibelt Alpha Flex 100 AT20 / 9600 AFX, a timing belt with AT20 profile and 9600 mm length. Use the details here to confirm it matches your drive before you request a quote.
The Optibelt Alpha Flex 100 AT20 / 9600 AFX is a timing belt with an AT20 profile, a 9600 mm length, and a 20 mm pitch. The marking on your existing belt should include the profile and length; if it reads AT20 and 9600 mm, this belt matches those dimensions. Always compare the full part number and the physical belt to the drive before ordering.
For a quote, send the part number 100 AT20 / 9600 AFX, the profile AT20, and the length 9600 mm. If the old belt is worn or the marking is unreadable, measure the pitch and length and note the number of teeth. Our team can help confirm the right belt or suggest an equivalent based on the data you provide.
Inspect the pulleys and tensioner when you replace a timing belt. Check for wear, alignment, and proper tension. Replace the belt if you see cracks, missing teeth, or exposed cords. A correct match by profile and length keeps the drive running as intended.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 9600mm
Frequently asked questions
- How do I identify the correct timing belt from the old one?
- Read the marking on the back of the old belt. It typically shows the profile and length. For this belt, look for AT20 and 9600 mm. If the marking is unreadable, measure the pitch and length and count the teeth.
- What information do I need to request a quote?
- Send the part number 100 AT20 / 9600 AFX, the profile AT20, and the length 9600 mm. If you have the old belt, include a photo of the marking. Our team will confirm the belt or suggest an equivalent.
- What should I check when replacing a timing belt?
- Inspect the pulleys and tensioner for wear, alignment, and proper tension. Replace the belt if you see cracks, missing teeth, or exposed cords. Confirm the new belt matches the profile and length of the old one.