Timing belt Optibelt 100 AT20 / 9400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 AT20 / 9400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 AT20 / 9400 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 100 AT20 / 9400 AFX. It uses the AT20 profile with a 20 mm pitch and a 9400 mm length. Before fitting it, inspect the drive and sheaves so the new belt runs correctly.
A timing belt replacement is a good moment to check the whole drive. Look at the sheaves for worn grooves, buildup or damage, and confirm they are aligned and secure. Check that the shaft turns freely and that no components interfere with the belt path. Correcting these points before installation helps the new belt seat properly and avoids repeat failures.
The AT20 profile and 9400 mm length define where this belt fits. Verify the marking on the old belt matches 100 AT20 / 9400 AFX before ordering. If the marking is worn or unreadable, measure the profile and length and send those details with your request. We carry the Optibelt Alpha Flex line and can confirm the right belt for your drive.
To request a quote, send the part number 100 AT20 / 9400 AFX by WhatsApp or email. Include the quantity and any details from the old belt or drive. Our team replies promptly and can help confirm the belt or suggest an equivalent.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 9400mm
Frequently asked questions
- What details should I send with my quote request?
- Send the part number 100 AT20 / 9400 AFX, the quantity you need, and any marking or measurement from the old belt. If you have photos of the drive or sheaves, those can help us confirm the correct belt.
- How do I identify this belt on the machine?
- Look for the code 100 AT20 / 9400 AFX printed on the back of the belt. The AT20 profile and 9400 mm length are the key dimensions to match. If the marking is not clear, measure the pitch and length and include those values in your request.
- What should I check on the drive before installing a new belt?
- Inspect the sheaves for wear, damage or buildup, and confirm they are aligned and tight. Check that the shafts turn freely and that the belt path is clear. Addressing these points before fitting the new belt helps it run correctly.