V-belt Optibelt 10 x 700 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10 x 700 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 700 Li and any equivalents.
The Optibelt 10 x 700 Li is a classical V-belt in profile Z with a 700 mm length, part of the VB S=C Plus series. Before you fit it, take a few minutes to inspect the drive and sheaves so the new belt runs true and lasts.
Check sheave grooves for wear, rust, or buildup. A worn groove lets the belt sit too deep and slip, while a polished or bottomed-out groove points to replacement. Clean the grooves and confirm the sheaves are aligned and free of damage.
Look at the shaft bearings and the overall drive. Turn the sheaves by hand to feel for rough spots or play. Verify the take-up or tensioning range has enough travel for the 700 mm belt. If the old belt failed early, correct the cause before fitting the Optibelt 10 x 700 Li.
For a quote, send the part number 10 x 700 Li and the quantity you need. If you are unsure the profile and length match your drive, include the belt marking and a photo of the sheave; we will help confirm the right belt.
Dimensions
- Section
- Z
- Length
- 700mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear or buildup, confirm alignment, and check bearings for roughness or play. Also make sure the tensioning range can take up a 700 mm belt.
- How do I identify the belt I need?
- Note the marking on the back of the old belt. This Optibelt belt is profile Z with a 700 mm length, part number 10 x 700 Li.
- How do I request a quote?
- Send the part number 10 x 700 Li and the quantity by WhatsApp or email. If you are unsure of the profile or length, include the belt marking and a photo of the sheave.