V-belt Optibelt 10 x 670 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10 x 670 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 670 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with profile Z and a length of 670 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, which leads to slip and heat. Clean the grooves and confirm the sheaves are aligned with a straightedge or laser. Misalignment shortens belt life and can cause the belt to roll out of the groove.
Look at the old belt as you remove it. Cracks, glazing, and missing cords point to a drive problem, not just an old belt. Confirm the replacement matches the marking: profile Z and 10 x 670 Li. If the drive uses multiple belts, replace them as a set so the load stays shared.
Send the part number 10 x 670 Li by WhatsApp or email to request a quote. Our team can confirm this Optibelt VB S=C Plus belt is the right one for your drive.
Dimensions
- Section
- Z
- Length
- 670mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear and debris, verify sheave alignment, and check the bearings and shafts for play. Correct any issue before fitting the new belt so it runs true.
- How do I confirm this is the right belt for my drive?
- Read the marking on the old belt and match the profile and length. This belt is profile Z and 10 x 670 Li. If you are unsure, send the part number and a photo of the old belt for confirmation.
- Can I replace just one belt on a multi-belt drive?
- On a drive with multiple belts, replace all belts as a set. Mixing new and worn belts can cause uneven loading and premature failure.