V-belt Optibelt 10 x 1030 Li

OPTIBELT 10 x 1030 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 1030 Li and any equivalents.

This is an Optibelt VB S=C Plus classical V-belt in profile Z with a length of 1030 mm, marked 10 x 1030 Li. Classical V-belts in this profile are used on light-duty industrial drives such as small fans, pumps, blowers and compact machine tools. Use the profile and the length to confirm the belt matches the drive before you order.

To confirm fit, read the marking on the back of the old belt and compare it with the profile and length shown here. The profile Z and the 1030 mm length are the two figures that identify the belt, so both need to match the drive. If the old belt is worn or the marking has rubbed off, measure the outside length and check the pulley groove width against the profile.

Classical V-belts of this type sit in standard grooved pulleys and are commonly found on drives that run at moderate speeds and loads. When a drive uses more than one belt, replace the full set at the same time so the belts share the load evenly and run at the same tension. Inspect the pulleys for wear, alignment and buildup before fitting new belts.

Send the part number 10 x 1030 Li by WhatsApp or email and our team will reply promptly. If you are unsure whether this is the right belt for your drive, include the profile and length from the old belt and any details from the machine nameplate, and we can help confirm the correct belt or suggest an equivalent.