V-belt Optibelt 10 x 1016 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10 x 1016 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 1016 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a Z profile and a length of 1016 mm. It is the type of belt used on light-duty industrial drives, where a single belt runs between two pulleys in a simple, open configuration. Confirm the profile and length against your drive before ordering.
Classical V-belts like this one suit drives that do not need the higher power density of a narrow wedge belt. The Z profile is the smallest section in the classical range, so it is common on low-power equipment such as small fans, pumps and light conveyors. The belt is marked 10 x 1016 Li, which gives the section width and the inside length in millimeters.
To confirm fit, read the marking on the back of the old belt and compare it with this one. The profile letter and the length figure both have to match, and the belt should sit correctly in the pulley groove without riding high or bottoming out. Check the pulleys for wear and alignment while the belt is off, and replace belts in a set together so the load stays even.
Dimensions
- Section
- Z
- Length
- 1016mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Compare the profile and the length on the old belt's back marking with profile Z and 1016 mm. Also check that the belt sits properly in the pulley groove.
- What does the 10 x 1016 Li marking mean?
- The marking gives the section width and the inside length of the belt in millimeters. This belt is profile Z with a length of 1016 mm.
- What do you need to quote this belt?
- Send the part number 10 x 1016 Li, or the brand and the marking from the back of the old belt, by WhatsApp or email.