V-belt Movendis PP-XPA1807-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPA1807-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA1807-EPDM-AS and any equivalents.
The Movendis PP-XPA1807-EPDM-AS is a cogged narrow V-belt in the XPA profile with a length of 1807 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. To match it to the belt being replaced, read the marking on the back of the old belt and compare profile and length.
Cogged narrow V-belts are often used on drives where a standard wrapped belt would run hotter or slip. The raw edge and cogged construction are typical of this series, but the critical selection factors are the profile and the length. The XPA profile and 1807 mm length must match the old belt for the drive to run correctly.
When you have the old belt in hand, check the back for a printed code or profile and length. If the marking is worn, measure the outside length and compare it to 1807 mm, and confirm the profile is XPA. The part number PP-XPA1807-EPDM-AS can be used to request a quote.
If you are unsure whether this belt fits your drive, send a photo of the old belt's marking or the drive setup. We can confirm the profile and length and suggest an equivalent if needed. We carry the Movendis line and can help you match the right belt.
Dimensions
- Section
- XPA
- Length
- 1807mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the old belt for a marking that shows the profile and length. This belt is XPA profile and 1807 mm long. If the profile and length match, it is the correct size.
- What should I send to get a quote for this belt?
- Send the part number PP-XPA1807-EPDM-AS, or the profile and length from your old belt, by WhatsApp or email. A photo of the old belt's marking also helps.
- Can you help if the old belt's marking is unreadable?
- Yes. Send a photo of the belt and the drive. We can help identify the profile and length and confirm whether this belt or an equivalent is right.