V-belt Movendis PP-XPA1800-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPA1800-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA1800-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt is a cogged narrow V-belt in the XPA profile with a length of 1800 mm. It is used on industrial drives where a narrow cross-section and compact sheave size are required, and the raw edge cogged construction helps with heat dissipation and flexibility.
To confirm fit, check the drive sheave groove profile and the effective length marked on the old belt. The XPA profile and 1800 mm length are the key dimensions; if the old belt is worn or the marking is unreadable, measure the outside circumference and compare it to the 1800 mm value. This belt is not a substitute for a different profile or length without verifying both.
When replacing a cogged narrow V-belt, inspect the sheaves for wear, alignment and debris, and check the tensioner for smooth travel. On multi-belt drives, replace all belts in the set at the same time to keep load sharing even. After installation, run the drive briefly and re-check tension.
For a quote, send the part number PP-XPA1800-EPDM-AS and the quantity you need. If you are unsure whether this is the correct belt, include the old belt marking, the sheave profile, and the center distance so we can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- XPA
- Length
- 1800mm
Frequently asked questions
- How do I confirm that the PP-XPA1800-EPDM-AS fits my drive?
- Check the old belt for the XPA profile and 1800 mm length marking. Also verify the sheave groove profile matches XPA. If the marking is gone, measure the outside circumference and compare it to 1800 mm.
- Can I replace just one belt on a multi-belt drive?
- It is best practice to replace all belts in the set at the same time. Mixing new and used belts can cause uneven load sharing and premature wear.
- What information do you need to quote this belt?
- Send the part number PP-XPA1800-EPDM-AS and the quantity. If you want us to verify the fit, also include the old belt marking, sheave profile, and center distance.