V-belt Movendis PP-SPZ1737
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPZ1737 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ1737 and any equivalents.
The Movendis PP-SPZ1737 is a narrow wedge V-belt in the SPZ profile. It measures 1737 mm in length, with a 9.7 mm top width, 8 mm height, and a 40° angle. Use these dimensions to match it to the belt you are replacing.
When comparing the old belt, confirm the profile and length first. The SPZ profile is a narrow wedge cross-section, so a standard V-belt of the same length will not seat correctly in the pulley groove. Check the back of the old belt for its marking and measure the outside length to verify the 1737 mm figure.
The 9.7 mm top width and 8 mm height define how the belt fits the pulley groove. The 40° angle is the included angle of the belt cross-section. If any of these differ from the belt you remove, the replacement may not transmit load as intended or may wear unevenly.
For a quote, send the part number PP-SPZ1737 along with the machine or drive reference and the old belt marking. If you are unsure of the profile, include the pulley groove width and the belt length. Our team can confirm the SPZ profile and 1737 mm length against your application.
Dimensions
- Section
- SPZ
- Length
- 1737mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the old belt for its profile and length marking. The PP-SPZ1737 is an SPZ profile with a 1737 mm length, 9.7 mm top width, 8 mm height, and 40° angle. If those match, it is the same size.
- Can I use a standard V-belt instead of this narrow wedge belt?
- No. The SPZ profile is a narrow wedge cross-section. A standard V-belt has a different width-to-height ratio and will not seat correctly in the same pulley groove.
- What information should I send to request a quote?
- Send the part number PP-SPZ1737, the machine or drive reference, and the marking on the old belt. If the marking is worn, include the pulley groove width and the belt length so we can confirm the SPZ profile and 1737 mm length.