V-belt Movendis PP-SPZ1687
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPZ1687 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ1687 and any equivalents.
The Movendis PP-SPZ1687 is a narrow wedge V-belt in the PowerPlus series, built to the SPZ profile with a 1687 mm length. It measures 9.7 mm across the top, 8 mm in height and has a 40° angle. Use these four dimensions to match it against the belt you are replacing.
Start with the marking on the old belt. If it reads SPZ and 1687, this belt is the direct size match. Confirm the profile before ordering: an SPZ belt sits in a narrow wedge pulley groove, and a belt of another profile will not seat correctly even if the length looks close. The top width of 9.7 mm and height of 8 mm are the dimensions to check against the groove.
Length is the second check. Measure the old belt or read its length marking, and compare it with the 1687 mm length of the PP-SPZ1687. A belt that is too long or too short will not tension correctly, so treat the length and profile as a pair. If the old belt is worn or the marking is unreadable, note the drive it runs on and the pulley dimensions.
When you request a quote, send the part number PP-SPZ1687 along with the profile and length from the old belt. If the old marking differs, send that marking too so we can confirm the right belt or suggest an equivalent. Our team replies by WhatsApp or email.
Dimensions
- Section
- SPZ
- Length
- 1687mm
Frequently asked questions
- How do I confirm the PP-SPZ1687 matches the belt I am replacing?
- Check the old belt for an SPZ profile marking and a 1687 mm length. Then compare the top width of 9.7 mm and height of 8 mm against the pulley groove. If all four agree, the PP-SPZ1687 is the size match.
- What should I send with my quote request?
- Send the part number PP-SPZ1687, or the marking from the old belt if it differs, plus the profile and length. If the marking is unreadable, describe the drive and pulley dimensions and we will help confirm the right belt or suggest an equivalent.
- What are the dimensions of this belt?
- The Movendis PP-SPZ1687 is an SPZ profile narrow wedge V-belt with a 1687 mm length, 9.7 mm top width, 8 mm height and 40° angle.