V-belt Movendis PP-SPZ1787
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPZ1787 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ1787 and any equivalents.
The Movendis PP-SPZ1787 is a narrow wedge V-belt in the PowerPlus series. It has an SPZ profile, a 1787 mm length, a 9.7 mm top width, an 8 mm height and a 40° angle. Narrow wedge belts are common on compact, high-speed drives where a standard V-belt would be too wide or too heavy.
This belt is used on industrial drives that call for an SPZ profile and a 1787 mm length. Typical equipment includes pumps, fans, compressors, small conveyors and machine tools. The 40° angle and 9.7 mm top width are what identify the profile; the 1787 mm length sets the center distance. Confirm both before ordering.
To check fit, read the marking on the back of the old belt. If it shows SPZ and 1787, this belt matches those dimensions. Also inspect the pulleys for wear, alignment and groove condition. If the drive uses multiple belts, replace the full set so the load stays even across all belts.
When you request a quote, send the part number PP-SPZ1787 and the quantity. If you are matching an existing belt, include the marking from the back and a photo of the drive if possible. The team can confirm the profile and length or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1787mm
Frequently asked questions
- What does the SPZ profile mean for this belt?
- SPZ is the profile of this narrow wedge V-belt. It has a 9.7 mm top width, an 8 mm height and a 40° angle. These dimensions must match the pulley grooves for the belt to seat correctly.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for SPZ and 1787. Measure the length if the marking is worn. Also check that the pulleys are in good condition and aligned.
- Can I replace just one belt on a multi-belt drive?
- If the drive uses more than one belt, replace the full set at the same time. Mixing a new belt with worn belts can cause uneven loading and vibration.