V-belt Movendis PP-SPZ1320
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPZ1320 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ1320 and any equivalents.
The Movendis PP-SPZ1320 is a narrow wedge V-belt in the SPZ profile with a 1320 mm length. The profile and length are the two dimensions that identify this belt on a drive, so confirm both against the old belt before ordering.
SPZ sets the belt's cross-section: 9.7 mm top width, 8 mm height and a 40-degree angle. That profile governs how the belt sits in the pulley groove and carries load, so a belt of another profile is not a substitute even if it fits loosely.
The 1320 mm length is the datum length of this belt. Read the marking on the back of the old belt and compare it with the part number; if the marking is worn away, measure the outside circumference and share the drive details so the team can confirm the right belt.
This is a Movendis PowerPlus narrow wedge V-belt, a construction used where a compact, high-capacity drive is required. When several belts run on one drive, replace them as a set so the load stays evenly divided.
Dimensions
- Section
- SPZ
- Length
- 1320mm
Frequently asked questions
- What do the SPZ profile and 1320 mm length mean for my drive?
- SPZ is the narrow wedge cross-section, 9.7 mm top width by 8 mm height at a 40-degree angle, and 1320 mm is the belt length. Both must match the drive and the old belt.
- How do I confirm this is the belt I need?
- Check the marking on the back of the old belt for the profile and length, or measure the outside circumference and share the pulley dimensions with our team.
- Can I replace just one belt on a multi-belt drive?
- Replace the belts as a set. Mixing a new belt with worn belts on the same drive can leave the load unevenly divided.