V-belt Movendis PP-SPZ1287
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPZ1287 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ1287 and any equivalents.
The Movendis PP-SPZ1287 is a narrow wedge V-belt in the SPZ profile with a 1287 mm length. It is built to the 40-degree angle, 9.7 mm top width and 8 mm height shown in the belt data. When you need to identify a replacement, start with the marking on the back of the old belt.
Reading the back of a worn belt is the most direct way to confirm what you are running. Match the marking to the part number, then check the profile and length against the data here: SPZ, 1287 mm, 9.7 mm top width, 8 mm height, 40-degree angle. If the printing has worn off, measure the top width and outside length and compare them to these figures.
For drives that use narrow wedge V-belts, ordering by part number keeps the request simple. Send the marking you read, along with the part number PP-SPZ1287, and the team can confirm the belt or suggest an equivalent. If you are replacing more than one belt on the same drive, list every position so the set can be checked together.
Dimensions
- Section
- SPZ
- Length
- 1287mm
Frequently asked questions
- How do I confirm this is the right belt?
- Read the marking on the back of the old belt and compare it to PP-SPZ1287. Then verify the profile is SPZ and the length is 1287 mm, with the 9.7 mm top width, 8 mm height and 40-degree angle listed for this belt.
- What should I send to request a quote?
- Send the part number PP-SPZ1287, the marking from the old belt if it is legible, and the quantity you need. If the drive uses multiple belts, include the position of each one.
- Can you help if the marking is unreadable?
- Yes. Measure the top width and the outside length of the old belt and share those measurements. The team can compare them to the SPZ profile and 1287 mm length of this belt and help confirm the match.