V-belt Movendis PP-SPZ1250
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPZ1250 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ1250 and any equivalents.
The Movendis PP-SPZ1250 is a narrow wedge V-belt in the PowerPlus series. It has an SPZ profile and a length of 1250 mm. Before you fit it, take a few minutes to inspect the drive and sheaves.
A new belt will not correct a worn sheave. Check the groove flanks for wear, scoring or polish that indicates the belt has been slipping. Look for cracks, chips or a step at the bottom of the groove. If the sheaves are worn, the new belt will sit too deep and lose grip. Correct any misalignment between sheaves and check that the shafts turn freely.
The PP-SPZ1250 measures 9.7 mm across the top, 8 mm high and has a 40-degree angle. Its SPZ profile and 1250 mm length are the two dimensions to match when ordering. If you are replacing a belt on a drive with multiple belts, fit the full set at the same time so the load stays even.
To request a quote, send the part number PP-SPZ1250 by WhatsApp or email. If you are unsure whether this is the right belt, include the marking from the back of the old belt and a photo of the drive. The team can confirm the SPZ profile and 1250 mm length or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1250mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, cracks or scoring, verify alignment between sheaves and confirm the shafts turn freely. A worn or misaligned drive will shorten belt life.
- How do I identify the PP-SPZ1250 on the old belt?
- Look for the part number on the back of the belt. The PP-SPZ1250 is an SPZ profile belt with a 1250 mm length, a 9.7 mm top width, an 8 mm height and a 40-degree angle.
- What information should I send with my quote request?
- Send the part number PP-SPZ1250. If you are replacing an existing belt, include the marking from the back of the old belt and a photo of the drive so the team can confirm the profile and length.