V-belt Movendis PP-CX56-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX56-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX56-EPDM-AS and any equivalents.
The Movendis PP-CX56-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 1478 mm. It is built for drives that use a classical cross-section and need the flexibility of a raw-edge cogged construction.
To match this belt to the one being replaced, read the marking on the back of the old belt. Confirm the profile is CX and the length is 1478 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 1478 mm figure. The cogged raw-edge design is suited to smaller pulleys where a standard wrapped belt may not flex as easily.
Before ordering, inspect the drive for worn sheaves, misalignment, or damaged bearings that can shorten belt life. Replace belts in sets when the drive uses multiple belts, and check that all belts in the set have the same profile and length. The Movendis PP-CX56-EPDM-AS is a single cogged classical V-belt; confirm the quantity needed for your application.
Dimensions
- Section
- CX
- Length
- 1478mm
Frequently asked questions
- What do I need to send to request a quote for this belt?
- Send the part number PP-CX56-EPDM-AS and the quantity you need by WhatsApp or email. If you are replacing an existing belt, include the profile and length from the old belt so we can confirm the match.
- How can I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should show a CX profile and a length of 1478 mm. If the marking is not clear, measure the outside length and compare it to 1478 mm.
- Is this belt suitable for use in a set?
- Yes, it can be used in multi-belt drives. When replacing belts in a set, use belts of the same profile and length, and replace all belts in the set at the same time.