V-belt Movendis PP-CX56,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-CX56,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-CX56,5-EPDM-AS and any equivalents.
The Movendis PP-CX56,5-EPDM-AS is a cogged classical V-belt in the CX profile with a length of 1491 mm. Cogged classical belts are commonly used on drives where a raw-edge, molded-cog construction is preferred, such as on industrial machinery and auxiliary equipment. This page covers how to confirm the belt fits your drive before you order.
To confirm fit, read the marking on the back of the belt you are replacing and compare the profile and length to this belt. The profile is CX and the length is 1491 mm. If the old belt is worn or the marking is unreadable, measure the outside length and check the cross-section against the CX profile.
Cogged classical V-belts are used on drives that need flexibility around small pulleys and reliable power transmission. Inspect the pulleys for wear, alignment and debris, and check that the belt sits correctly in the groove without bottoming out. If a drive uses multiple belts, replace them as a set so the load is shared evenly.
When you request a quote, send the part number PP-CX56,5-EPDM-AS or the profile and length from the old belt. Our team can confirm the belt or suggest an equivalent based on the data you provide.
Dimensions
- Section
- CX
- Length
- 1491mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the back of the old belt for the profile and length. This belt is CX profile with a length of 1491 mm. If the marking is not readable, measure the old belt and compare it to these dimensions.
- Can I replace just one belt on a multi-belt drive?
- On drives that use more than one belt, it is good practice to replace all belts in the set at the same time. This keeps the load shared evenly across the belts and helps avoid uneven wear.
- What information should I send for a quote?
- Send the part number PP-CX56,5-EPDM-AS, or the profile and length from the belt you are replacing. If you have photos of the old belt or the drive, include those as well so we can confirm the correct belt.