V-belt Movendis PP-AX91-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX91-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX91-EPDM-AS and any equivalents.
When a drive is down, the fastest way to identify the correct replacement is to read the marking on the back of the old belt. This page covers the Movendis PP-AX91-EPDM-AS, a cogged classical V-belt in AX profile with a length of 2348 mm. Use the part number on the belt to confirm what you need, then send it to us for a quote.
The PP-AX91-EPDM-AS is part of the Movendis PowerPlus EPDM Cogged Raw Edge Classical series. It has an AX profile and a length of 2348 mm. The cogged raw edge construction is typical of this series, and the EPDM compound is specified in the belt designation. If the back of the old belt is still legible, the part number and profile are the most reliable identifiers.
If the marking is worn or missing, measure the length and note the profile from the drive. The AX profile and 2348 mm length are the key dimensions for this belt. We carry Movendis belts and can help confirm that this part number matches your application. Send the part number, profile and length by WhatsApp or email, and we will reply with a quote.
For drives using multiple belts, it is good practice to replace the full set at the same time. Confirm that all belts in the set share the same part number and show no signs of cracking, glazing or uneven wear. If you need help reading a faded marking, send a photo of the belt and the drive nameplate.
Dimensions
- Section
- AX
- Length
- 2348mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows PP-AX91-EPDM-AS, this is the same part number. If the marking is unreadable, measure the outside length and check that the profile is AX, then send those details for confirmation.
- What should I send to request a quote?
- Send the part number PP-AX91-EPDM-AS, or the profile (AX) and length (2348 mm) if the number is not visible. You can send this by WhatsApp or email, and we will reply with a quote.
- Can I replace just one belt on a multi-belt drive?
- On drives that use a set of belts, it is common practice to replace all belts at the same time. Mixing a new belt with worn belts can cause uneven load. Confirm that every belt in the set matches the same part number.