V-belt Movendis PP-AX90-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX90-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX90-EPDM-AS and any equivalents.
The Movendis PP-AX90-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 2323 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true and lasts. MR Industrial Accessories supplies this belt to maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.
Check sheave grooves for wear, rust, burrs or embedded debris. Worn grooves let a new belt sit too deep, which causes slip and heat. Confirm the sheaves are aligned and the shafts turn freely. Look for oil or grease on the drive and clean it off; contamination shortens belt life.
Measure the old belt and match the marking on its back to confirm the AX profile and the 2323 mm length. The PP-AX90-EPDM-AS is a cogged classical V-belt, so its raw-edge construction runs cooler and flexes over small pulleys. If you are replacing a set, fit all belts at the same time so the load stays even.
Send the part number PP-AX90-EPDM-AS by WhatsApp or email to request a quote. If you are unsure about the profile or length, include a photo of the belt marking and the sheave dimensions. Our team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 2323mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, rust, burrs or debris, verify alignment and free rotation, and remove any oil or grease. Correcting these issues first helps the new belt seat properly and avoid premature slip.
- How do I confirm the PP-AX90-EPDM-AS is the right belt?
- Compare the marking on the back of your old belt with the part number and check the AX profile and 2323 mm length. If the marking is worn, send a photo and the sheave dimensions for confirmation.
- Can you help if I need a different profile or length?
- Yes. Send the part number or the belt marking and dimensions by WhatsApp or email. We will check the data and suggest an equivalent if the exact belt is not what your drive needs.