V-belt Movendis PP-AX91,5-EPDM-AS

MOVENDIS PP-AX91,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX91,5-EPDM-AS and any equivalents.

The Movendis PP-AX91,5-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 2361 mm. It is part of the PowerPlus EPDM Cogged Raw Edge Classical series. To match it to the belt being replaced, start with the marking on the old belt and confirm both the profile and the length.

A correct match comes from the belt that is coming off the drive. Read the marking on the back of the old belt: the profile should be AX and the length should be 2361 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 2361 mm figure. The raw edge and cogged construction of this belt are part of its series designation, so the replacement should carry the same profile and length.

When you request a quote, send the part number PP-AX91,5-EPDM-AS or the details from the old belt: profile AX and length 2361 mm. The team can confirm the belt or suggest an equivalent based on those two values. If you are replacing more than one belt on the same drive, include the quantity and the position of each belt so the set can be matched correctly.

Before installing, inspect the drive for worn sheaves, misalignment, or damaged bearings. A new belt on a worn drive can wear quickly or run incorrectly. Confirm that the replacement belt sits properly in the sheave grooves and that the tension is set according to the drive manufacturer's specification. Keep the old belt marking with the equipment records for the next replacement.