V-belt Movendis PP-AX49-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX49-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX49-EPDM-AS and any equivalents.
The Movendis PP-AX49-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 1282 mm. It is built for drives that use a classical cross-section and need the extra flexibility of a raw-edge cogged construction. Use the part number and the marking on the old belt to confirm the match before ordering.
Matching starts with the belt you are replacing. Read the marking on the back of the old belt and compare it with the profile and length: AX profile, 1282 mm. If the old belt is worn or the marking is unreadable, measure the outside length and check the cross-section against the pulley groove. A belt that is too long or too short will not sit correctly in the sheave.
This belt is a cogged classical V-belt, so it has a raw-edge profile with cogs on the underside. That construction is common on drives with small pulleys or where a standard wrapped belt runs hot or slips. Inspect the pulleys for wear, alignment and debris at the same time, and replace belts in sets when the drive uses more than one belt so the load stays even.
When you request a quote, send the part number PP-AX49-EPDM-AS, the quantity and the drive or equipment it fits. If you only have the old belt, send a photo of the back marking and the pulley groove. The team can confirm the AX profile and 1282 mm length and suggest an equivalent if this exact belt is not the right fit.
Dimensions
- Section
- AX
- Length
- 1282mm
Frequently asked questions
- How do I confirm the Movendis PP-AX49-EPDM-AS is the right replacement?
- Check the old belt marking for the AX profile and 1282 mm length, or measure the outside length and compare the cross-section to the pulley groove. Send the part number and a photo of the old belt if you need help confirming it.
- What does the cogged construction mean for my drive?
- The raw-edge cogged design is made for drives where a standard wrapped belt may run hot or slip, and it works with small pulleys. Inspect pulley alignment and wear when you replace the belt.
- What information should I include with a quote request?
- Send the part number PP-AX49-EPDM-AS, the quantity, and the equipment or drive it fits. If you do not have the number, send the old belt marking and the pulley groove dimensions so the team can confirm the profile and length.