V-belt Movendis PP-AX48,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX48,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX48,5-EPDM-AS and any equivalents.
The Movendis PP-AX48,5-EPDM-AS is a cogged classical V-belt with an AX profile and a 1269 mm length. The AX profile is a narrow cross-section, and the cogged construction is typical of raw-edge belts used on smaller pulleys. This page gives you the profile and length so you can match an existing belt or specify a replacement.
The AX profile sets the top width and height of the belt, so it must match the pulley groove. The 1269 mm length is the datum length for this belt. Both values are printed on the belt and should be checked against the drive before ordering.
The cogged raw edge design is common on drives that need flexibility around small diameter pulleys. The EPDM compound is the material specified for this belt. If you are replacing a belt on a drive that uses an AX profile, confirm the length and the profile from the old belt.
To request a quote, send the part number PP-AX48,5-EPDM-AS, the profile AX, and the length 1269 mm. If you have the old belt, a photo of the back marking helps confirm the correct item. The team can also check a measured length against this belt.
Dimensions
- Section
- AX
- Length
- 1269mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The AX profile defines the cross-section that fits the pulley groove, and the 1269 mm length is the datum length. Both must match the drive for the belt to run correctly.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. It should show the profile and length. If it reads AX and 1269 mm, this belt matches those dimensions.
- What information should I send with my quote request?
- Send the part number PP-AX48,5-EPDM-AS, the profile AX, and the length 1269 mm. If you have the old belt, include a photo of the back marking.