V-belt Movendis PP-AX126-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX126-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX126-EPDM-AS and any equivalents.
The Movendis PP-AX126-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 3237 mm. This page gives maintenance, engineering and purchasing teams the profile and length data needed to confirm a replacement or specify a new drive.
The AX profile identifies a classical V-belt cross-section, and the cogged raw edge construction is intended for drives where the belt wraps small pulleys or runs at higher speeds. The 3237 mm length is the datum to match against the existing belt or the drive drawing. If the current belt is worn or the marking has faded, measure the outside length and compare it with 3237 mm before ordering.
For a quote, send the part number PP-AX126-EPDM-AS and the quantity required. If you are replacing a belt on an existing drive, include the profile and length from the old belt or a photo of the back marking so we can confirm the match. We carry Movendis belts and can help verify that this AX profile and 3237 mm length suit your application.
When inspecting the drive before replacement, check pulley grooves for wear, verify alignment, and confirm that the take-up range can accommodate a new belt of the same length. Replacing belts in sets on multi-belt drives helps maintain even tension across the grooves.
Dimensions
- Section
- AX
- Length
- 3237mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The AX profile defines the cross-section, and 3237 mm is the length. Both values must match the drive requirements or the belt you are replacing.
- How do I request a quote for the PP-AX126-EPDM-AS?
- Send the part number and quantity by WhatsApp or email. If you are unsure of the profile or length, include the marking from your old belt or a photo so we can confirm.
- Can I replace just one belt on a multi-belt drive?
- On drives with multiple belts, replacing the full set helps maintain even tension and load sharing. Provide the quantity of belts on the drive when requesting a quote.