V-belt Movendis PP-AX126,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX126,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX126,5-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Classical belt is a cogged classical V-belt in the AX profile, 3250 mm long. Before you install it, inspect the drive and sheaves so the new belt seats and wears correctly.
Check sheave grooves for wear, burrs, rust or embedded debris. Worn grooves let the belt sit too deep and slip; damaged groove walls cut the raw edge. Confirm the sheaves are aligned and the shafts turn freely. If the old belt failed early, look for a drive problem rather than just replacing the belt.
Verify the replacement matches the old marking: AX profile and 3250 mm length. The cogged raw edge design is suited to smaller pulley diameters where a classical wrapped belt would run hot. Fit the belt without prying it over the sheave flange, then set tension to the drive manufacturer's specification and recheck after the first run-in period.
If you are unsure the belt is right for the drive, send the part number and a photo of the old belt marking. We carry the Movendis PowerPlus EPDM Cogged Raw Edge Classical line and can confirm the AX 3250 mm belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 3250mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, burrs and debris, confirm alignment, and make sure the shafts turn freely. Correct any drive issue before installing the new belt.
- How do I confirm this is the right belt?
- Read the marking on the back of the old belt. This belt is AX profile and 3250 mm long. If the marking matches, it is the correct size.
- Can you help if I only have the part number?
- Yes. Send the part number by WhatsApp or email and we will confirm the Movendis PP-AX126,5-EPDM-AS or suggest an equivalent.