V-belt Movendis PP-AX127,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX127,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX127,5-EPDM-AS and any equivalents.
The Movendis PP-AX127,5-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 3276 mm. Cogged classical belts are commonly used on drives with small pulleys where a standard wrapped belt may not flex enough. Confirm the profile and length against your existing belt before ordering.
The AX profile and 3276 mm length are the two dimensions to match. Check the marking on the back of the old belt: it should show AX and the length. If the belt is worn or the marking is unreadable, measure the outside length and compare it with 3276 mm. The cogged construction is suited to drives that run over smaller pulleys, where the raw edge and molded cogs help the belt bend without cracking.
Inspect the pulleys while the belt is off. Look for worn grooves, rust, or oil that can shorten belt life. Check that the pulleys are aligned and that the take-up has enough travel to tension a new belt. Replace belts in sets when a drive uses more than one, so the load stays even.
For a quote, send the part number PP-AX127,5-EPDM-AS, or the profile and length if you are replacing a different brand. If you are unsure of the profile, send a photo of the belt marking and the pulley grooves. We carry the Movendis line and can confirm the right belt for your drive.
Dimensions
- Section
- AX
- Length
- 3276mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Match the profile AX and the length 3276 mm to the marking on your old belt or to the drive's requirements. If the old belt is unreadable, measure the outside length and compare it with 3276 mm.
- What should I send to request a quote?
- Send the part number PP-AX127,5-EPDM-AS, or the profile and length if you are cross-referencing another belt. A photo of the belt marking and the pulleys helps confirm the fit.
- When should I replace the belt?
- Replace it when you see cracks, missing cogs, glazing, or exposed cords, or when the belt bottoms out in the pulley groove. On multi-belt drives, replace all belts in the set at the same time.