V-belt Movendis P-SPZ887
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ887 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ887 and any equivalents.
The Movendis P-SPZ887 is a narrow wedge V-belt with an SPZ profile and a length of 887 mm. It measures 9.7 mm across the top, 8 mm in height, and has a 40° angle. Before you fit this belt, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, which reduces grip and shortens belt life. Confirm that the sheaves are aligned and that the grooves match the SPZ profile. Also check bearings, shafts, and tensioning hardware for play or roughness.
If the old belt is worn, stretched, or damaged, replace it with the same profile and length. The P-SPZ887 has an SPZ profile and a length of 887 mm, with a 9.7 mm top width, 8 mm height, and 40° angle. When a drive uses multiple belts, replace them as a set so the load stays evenly distributed.
To request a quote, send the part number P-SPZ887 by WhatsApp or email. Our team can confirm the belt or suggest an equivalent. Include the drive details and a photo of the old belt marking if you have one.
Dimensions
- Section
- SPZ
- Length
- 887mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear or debris, confirm alignment, and check bearings and tensioning hardware. Worn or misaligned sheaves can cause the new belt to fail early.
- How do I confirm the P-SPZ887 is the right belt?
- Compare the profile and length to your old belt. The P-SPZ887 is an SPZ profile with a length of 887 mm. If you send the part number, our team can help confirm it.
- Should I replace multiple belts at the same time?
- Yes. On drives that use more than one belt, replace the full set so all belts share the load evenly and wear at the same rate.