V-belt Movendis P-SPZ862
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ862 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ862 and any equivalents.
The Movendis P-SPZ862 is a narrow wedge V-belt in the SPZ profile, with a length of 862 mm, a top width of 9.7 mm, a height of 8 mm and a 40° angle. Use these four dimensions to match it against the belt you are replacing before you order.
Start with the belt that is coming off the drive. Read the marking on the back: if it shows an SPZ profile and an 862 mm length, the P-SPZ862 is the direct match. Confirm the cross-section as well, since a narrow wedge belt is identified by its profile rather than by a single length number. The P-SPZ862 measures 9.7 mm across the top, 8 mm in height and has a 40° angle.
If the old belt is worn, stretched or its marking is no longer legible, measure what you can and compare it with the profile and length above. A belt that has run for a long time may not sit at its original dimensions, so match on the profile first, then on length. Send the part number you need, or the details from the belt you are replacing, and we will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 862mm
Frequently asked questions
- How do I confirm the P-SPZ862 fits my drive?
- Check the marking on the belt being replaced for an SPZ profile and an 862 mm length, and compare the cross-section. The P-SPZ862 has a 9.7 mm top width, an 8 mm height and a 40° angle.
- What should I send to request a quote?
- Send the part number P-SPZ862, or the profile and length from the belt you are replacing, through WhatsApp or email. If the marking is unreadable, include the dimensions you measured and the drive details.
- Can you help if the old belt marking is worn off?
- Yes. Send the profile and length you can read or measure, along with the belt dimensions, and we will help confirm the right belt or suggest an equivalent.