V-belt Movendis P-SPZ875
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ875 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ875 and any equivalents.
The Movendis P-SPZ875 is a narrow wedge V-belt in the SPZ profile, with an 875 mm length, a 9.7 mm top width and an 8 mm height. We carry it for maintenance and purchasing teams who need a direct replacement by part number. Before you fit it, inspect the drive and sheaves so the new belt runs true.
A worn belt often shares the blame with worn sheaves. Check groove flanks for wear, ridges or polish, and look for a step where the belt has been running. Measure groove width if you can, and compare it to the 9.7 mm top width and 40-degree angle of this SPZ belt. A sheave that has opened up will let the belt sit too low, slip and wear out early.
Align the sheaves and check for runout, then confirm the drive takes an SPZ profile and an 875 mm length. Clean the grooves, check the bearings for play and noise, and make sure nothing rubs the belt path. When you replace, set tension to the drive manufacturer's figure and recheck after the first run-in period.
For a quote, send the part number P-SPZ875 and the quantity you need. If you are matching an old belt, the marking on the back is the quickest way to confirm the profile and length against this Movendis narrow wedge V-belt.
Dimensions
- Section
- SPZ
- Length
- 875mm
Frequently asked questions
- What are the dimensions of the Movendis P-SPZ875?
- It is an SPZ profile narrow wedge V-belt with an 875 mm length, a 9.7 mm top width, an 8 mm height and a 40-degree angle.
- How do I confirm this belt fits my drive?
- Check that the drive uses the SPZ profile and that the old belt's length matches 875 mm. Inspect the sheave grooves for wear and confirm the 40-degree angle matches the pulley groove.
- What should I send to request a quote?
- Send the part number P-SPZ875 and the quantity you need by WhatsApp or email, and our team will reply promptly.