V-belt Movendis P-SPZ1650
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1650 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1650 and any equivalents.
The Movendis P-SPZ1650 is a narrow wedge V-belt in the SPZ profile, 1650 mm long, with a 9.7 mm top width, 8 mm height, and 40° angle. For a maintenance or purchasing professional, the profile and length are the two dimensions that decide whether a belt will sit correctly in the pulley groove and run at the right tension. This page covers what those numbers tell you and what to confirm before you order.
The SPZ profile identifies a narrow wedge cross-section, so the belt is built to run in SPZ-grooved pulleys rather than a classical V-belt sheave. The 1650 mm length is the datum you match against the old belt or the drive specification. The 9.7 mm top width, 8 mm height, and 40° angle describe the cross-section that must seat in the groove.
When you replace a belt on an existing drive, read the marking on the back of the old belt first. If it shows an SPZ profile and a 1650 mm length, the P-SPZ1650 is the direct size to quote. If the marking is worn or unreadable, measure the outside length and the top width, and confirm the pulley groove is an SPZ section before ordering.
Send the part number P-SPZ1650 by WhatsApp or email and the team will confirm the belt for your drive. If you are unsure of the profile, include the old belt marking, the pulley groove dimensions, and the drive arrangement so the right narrow wedge V-belt can be identified.
Dimensions
- Section
- SPZ
- Length
- 1650mm
Frequently asked questions
- What do the SPZ profile and 1650 mm length mean for fit?
- SPZ is the narrow wedge cross-section, and 1650 mm is the length. Both must match the pulley groove and the drive layout for the belt to seat and tension correctly.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt. If it reads SPZ and 1650 mm, this is the matching size. If the marking is gone, measure the outside length and top width and check the pulley groove section.
- What should I send to get a quote?
- Send the part number P-SPZ1650, or the old belt marking and the pulley groove details if you need the profile confirmed. The team replies by WhatsApp or email.