V-belt Movendis P-SPZ1612
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1612 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1612 and any equivalents.
The Movendis P-SPZ1612 is a narrow wedge V-belt in the SPZ profile, with a 1612 mm length, 9.7 mm top width, 8 mm height and a 40-degree angle. Before fitting this belt, inspect the drive and sheaves so the new belt runs correctly from the start. We carry this belt and quote by part number through WhatsApp or email.
A new belt will not correct a worn drive. Check sheave grooves for wear, cracks or embedded debris, confirm the sheaves are aligned, and look for oil, heat or loose mounting that may have shortened the life of the old belt. If the old belt shows uneven wear or glazing, address the cause before installing the replacement.
The P-SPZ1612 is identified by its SPZ profile and 1612 mm length, along with the 9.7 mm top width, 8 mm height and 40-degree angle. When you request a quote, send the part number and, if the belt is worn, the marking from the back of the old belt so we can confirm the correct replacement.
For drives that use multiple belts, replace the full set at the same time and re-tension to the drive manufacturer's specification. Keep the old belt for comparison if you are unsure of the profile or length.
Dimensions
- Section
- SPZ
- Length
- 1612mm
Frequently asked questions
- What should I check on the drive before installing the P-SPZ1612?
- Inspect the sheaves for groove wear, cracks, debris and alignment, and correct any oil, heat or loose mounting issues. A worn sheave can damage a new belt quickly.
- How do I confirm this is the right belt for my drive?
- Match the SPZ profile and 1612 mm length. If you have the old belt, read the marking on the back and send it with your quote request so we can help confirm the replacement.
- Can I replace just one belt on a multi-belt drive?
- For drives using multiple belts, replace the full set at the same time and re-tension to the drive manufacturer's specification. Mixing a new belt with worn belts can cause uneven loading.