V-belt Movendis P-SPZ1687
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1687 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1687 and any equivalents.
The Movendis P-SPZ1687 is a narrow wedge V-belt in the SPZ profile with a 1687 mm length. It is built to the 40-degree angle, 9.7 mm top width and 8 mm height shown in the data. Use these figures to match it to the belt you are replacing.
When matching a narrow wedge V-belt, start with the profile and the length. The SPZ profile sets the cross-section, and 1687 mm is the length to compare against the old belt. The 9.7 mm top width, 8 mm height and 40-degree angle give you the dimensions to check before you order.
The cleanest way to confirm a match is to read the marking on the back of the belt being replaced. If the old belt shows SPZ and 1687 mm, the P-SPZ1687 is the size to quote. If the marking is worn or missing, measure the top width, height and length and compare them with the values above.
For a quote, send the part number P-SPZ1687, or send the profile and length from the old belt. If you are replacing more than one belt on the same drive, include the quantity so the set can be quoted together.
Dimensions
- Section
- SPZ
- Length
- 1687mm
Frequently asked questions
- How do I confirm the P-SPZ1687 matches my old belt?
- Check the marking on the back of the old belt for the SPZ profile and the 1687 mm length. If the marking is not readable, measure the top width, height and length and compare them with the 9.7 mm top width, 8 mm height and 1687 mm length of this belt.
- What measurements define this belt?
- It is an SPZ profile narrow wedge V-belt with a 1687 mm length, a 9.7 mm top width, an 8 mm height and a 40-degree angle.
- What should I send to request a quote?
- Send the part number P-SPZ1687. If you are not sure of the part number, send the profile and length from the belt you are replacing, along with the quantity needed.