V-belt Movendis P-SPA1932
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1932 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1932 and any equivalents.
The Movendis P-SPA1932 is a narrow wedge V-belt in the SPA profile with a 1932 mm length. The profile and length are the two dimensions that determine fit on a drive, so both are stated directly in the part number reference.
The SPA profile is a narrow wedge section, and this belt measures 12.7 mm across the top, 10 mm in height, and 40° on the flank angle. The 1932 mm length is the datum you match against the drive. When you read a belt marking, confirm the profile letters and the length before ordering, because a different length in the same SPA section will not sit correctly in the sheave grooves.
For a quote, send the part number P-SPA1932 and the quantity you need. If you are replacing a belt that is worn or unreadable, send the profile and length from the old belt, or a photo of the back marking, and the team can confirm the SPA section and 1932 mm length against your request. We carry Movendis narrow wedge V-belts and can help you match the belt to the drive.
Narrow wedge belts are used where a compact section is needed for the load, and the SPA profile is one of the standard narrow sections. Check the sheave grooves for wear and the drive for alignment when you replace the belt. Replacing belts in sets keeps matched drives running evenly.
Dimensions
- Section
- SPA
- Length
- 1932mm
Frequently asked questions
- What do the SPA profile and 1932 mm length mean for fit?
- SPA is the narrow wedge section, and 1932 mm is the belt length. The belt also has a 12.7 mm top width, 10 mm height, and 40° angle. Match the profile and length to the drive and sheave grooves.
- How do I request a quote for the P-SPA1932?
- Send the part number P-SPA1932 and the quantity you need by WhatsApp or email. If you are replacing an unmarked belt, include the profile and length from the old belt or a photo of the back marking.
- What should I check when replacing a narrow wedge V-belt?
- Inspect the sheave grooves for wear and check drive alignment. If the drive uses multiple belts, replace them as a set so the load stays evenly distributed.