V-belt Movendis P-SPA1925
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1925 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1925 and any equivalents.
The Movendis P-SPA1925 is a narrow wedge V-belt in the SPA profile. It measures 1925 mm in length, with a 12.7 mm top width, 10 mm height and a 40-degree angle. To match it to the belt being replaced, confirm the profile and length on the old belt.
The most reliable way to match this belt is to read the marking on the back of the belt you are replacing. Look for the profile, SPA, and the length, 1925 mm. If the marking is worn or missing, measure the top width and the outside length and compare them to the values here: 12.7 mm top width and 1925 mm length.
The 40-degree angle and 10 mm height are also part of the SPA profile, so a belt with the same length but a different profile will not seat correctly in the pulley groove. When the drive runs more than one belt, replace the full set so the load stays even across all belts.
For a quote, send the part number P-SPA1925 and the quantity you need. If the old belt is not readable, send the drive make and model along with the pulley groove dimensions. We carry the Movendis line and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 1925mm
Frequently asked questions
- How do I confirm the P-SPA1925 is the right belt?
- Check the marking on the back of the belt being replaced. It should show the SPA profile and the 1925 mm length. If the marking is gone, measure the top width and outside length and compare them to 12.7 mm and 1925 mm.
- What should I send to get a quote?
- Send the part number P-SPA1925 and the quantity. If you are not sure of the number, send the old belt marking or the drive and pulley details so we can help confirm the right belt.
- Can I replace just one belt in a multi-belt drive?
- When a drive uses more than one belt, replace the full set so all belts share the load evenly. Mixing a new belt with worn belts can cause uneven tension and faster wear.