V-belt Movendis P-SPA1957
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1957 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1957 and any equivalents.
The Movendis P-SPA1957 is a narrow wedge V-belt in the SPA profile with a 1957 mm length. The SPA profile is a narrow cross-section, so the belt runs in a matching SPA pulley groove. The part number identifies the profile and the length, which is what a buyer needs to confirm a replacement.
The profile and length are the two dimensions that determine fit. This belt has an SPA profile, a top width of 12.7 mm, a height of 10 mm and a 40 degree angle. The length is 1957 mm. When you check a drive, compare those figures with the belt you are replacing and with the pulley groove. A narrow wedge V-belt in the SPA profile seats in an SPA groove, so the profile must match before the length is considered.
If you are matching an old belt, read the marking on the back. The P-SPA1957 marking gives the profile and the length in one line, which is often faster than measuring a worn belt. If the marking is unreadable, measure the outside length if the old belt is intact, or send the drive details and we can help confirm the right belt or suggest an equivalent.
To request a quote, send the part number P-SPA1957 by WhatsApp or email. If you are replacing more than one belt on the same drive, send the quantity and the position so we can quote the set. For drives with multiple belts, replacing them as a set helps keep tension even across the grooves.
Dimensions
- Section
- SPA
- Length
- 1957mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The SPA profile tells you the belt is a narrow wedge V-belt with a 12.7 mm top width, 10 mm height and 40 degree angle, so it fits an SPA pulley groove. The 1957 mm length tells you the belt length. Both must match the drive before the belt will fit and run correctly.
- How do I confirm this is the right replacement?
- Check the marking on the back of the old belt for the profile and length. If it reads SPA and 1957 mm, this belt matches. If the marking is gone, compare the old belt against the profile and length above, or send us the drive details and we can help confirm the right belt or suggest an equivalent.
- What should I send with my quote request?
- Send the part number P-SPA1957, the quantity you need, and the drive position if you are replacing more than one belt. If you are unsure about the profile or length, include the old belt marking or the pulley groove details so we can help confirm.