V-belt Movendis P-SPA1180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1180 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1180 and any equivalents.
The Movendis P-SPA1180 is a narrow wedge V-belt with an SPA profile and a length of 1180 mm. If you are replacing an existing belt, start by comparing the marking on the old belt to these two values. The top width is 12.7 mm, the height is 10 mm, and the included angle is 40 degrees.
To match this belt to the one being replaced, read the profile and length from the old belt's back. The profile must be SPA, and the length must be 1180 mm. Also confirm the top width of 12.7 mm and the height of 10 mm if you can measure the old belt. The 40-degree angle is part of the SPA profile geometry.
If the old belt is worn or the marking is unreadable, measure the outside length and the top width with a caliper. A belt that is too narrow or too wide will not sit correctly in the pulley groove. Send the part number P-SPA1180, or the profile and length you measured, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 1180mm
Frequently asked questions
- How do I match the Movendis P-SPA1180 to my old belt?
- Check the marking on the back of the old belt. It should show the SPA profile and a length of 1180 mm. If it does, this belt matches those dimensions. You can also measure the top width (12.7 mm) and height (10 mm) to confirm.
- What should I send to get a quote for this belt?
- Send the part number P-SPA1180, or the profile and length from your old belt. If you have the top width and height, include those as well. We will confirm the belt or suggest an equivalent.
- Can I use this belt if my old belt is a different brand?
- Yes, as long as the profile is SPA and the length is 1180 mm. The top width, height, and 40-degree angle are part of that profile. If your old belt has a different profile or length, send us the details and we will help you find the right one.