V-belt Movendis P-SPA1157
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1157 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1157 and any equivalents.
The Movendis P-SPA1157 is a narrow wedge V-belt in the SPA profile, with a 1157 mm length, 12.7 mm top width, 10 mm height, and 40° angle. Before you fit it, inspect the drive and sheaves to confirm they are clean, aligned, and free of wear. A new belt on a worn drive will not perform as intended.
Check sheave grooves for wear, rust, or debris. Worn grooves can cause the belt to sit too deep, leading to slip and heat. Verify that sheaves are aligned and that no oil or grease is present on the belt contact surfaces.
Confirm the drive is isolated and locked out before removing the old belt. Inspect all components, including bearings and tensioners, for smooth operation. Replace any damaged parts before installing the new belt.
When fitting the P-SPA1157, adjust tension according to the drive manufacturer's specification. Recheck tension after the first few hours of operation. Keep the belt free of contaminants and re-inspect periodically.
Dimensions
- Section
- SPA
- Length
- 1157mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or debris, and verify alignment. Ensure all components turn freely and that no oil or grease is present.
- How do I identify the correct replacement belt?
- Look for the marking on the back of the old belt. The P-SPA1157 has an SPA profile and a 1157 mm length, with a 12.7 mm top width, 10 mm height, and 40° angle.
- What information do I need to request a quote?
- Send the part number P-SPA1157, the quantity, and any details from the old belt marking. We will confirm the belt and reply promptly.