V-belt Movendis P-SPA1150
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1150 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1150 and any equivalents.
The Movendis P-SPA1150 is a narrow wedge V-belt with an SPA profile and a length of 1150 mm. It is built to the 12.7 mm top width, 10 mm height and 40 degree angle shown in the specification. Use these figures to match it against the belt currently on the drive.
The most reliable way to match this belt is to read the marking on the back of the belt being replaced. Confirm the profile is SPA and the length is 1150 mm. Then check the top width of 12.7 mm, the height of 10 mm and the angle of 40 degrees against the old belt or the drive's pulley groove. A narrow wedge V-belt in the SPA profile seats differently from a classic V-belt, so the profile and length must agree before you order.
Narrow wedge V-belts are commonly replaced as a set when a drive uses more than one belt. If the existing belts are worn, stretched or mismatched, replacing the full set helps keep the load evenly distributed across the grooves. Inspect the pulleys at the same time for wear, alignment and any damage that could shorten belt life.
To request a quote, send the part number P-SPA1150, the quantity, and a photo of the marking on the old belt if it is readable. If the marking is worn away, send the drive details and the old belt dimensions. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 1150mm
Frequently asked questions
- How do I confirm the P-SPA1150 is the correct belt?
- Check the marking on the back of the old belt for the SPA profile and 1150 mm length. Also compare the top width of 12.7 mm, the height of 10 mm and the 40 degree angle with the old belt and the pulley groove.
- Should I replace all belts on the drive at once?
- When a drive uses multiple belts, replacing them as a set is standard practice. It helps avoid mixing worn and new belts, which can cause uneven loading across the grooves.
- What should I send to get a quote for this belt?
- Send the part number P-SPA1150 and the quantity you need. If you have the old belt, a photo of its back marking helps confirm the match; if not, send the drive details and old belt dimensions.