V-belt Movendis P-C96
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C96 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C96 and any equivalents.
The Movendis P-C96 is a classical wrapped V-belt in the C profile, with a 2438 mm length. If you are replacing a belt on an existing drive, this page gives you the dimensions to check against the belt in your hand.
Start by reading the marking on the back of the belt you are removing. A C profile belt measures 22 mm across the top and 14 mm in height, with a 40 degree angle, so the old belt should match those three figures. Then confirm the length: the P-C96 is listed at 2438 mm. A belt that matches the profile but not the length will not sit correctly in the sheaves.
If the marking is worn off or the belt has been replaced before with something that did not fit, measure the drive instead. Compare your measured profile and length against the P-C96 figures above. For a quote, send the part number P-C96, or send the profile, the length and the application details if you are working from a measurement rather than a number.
Classical wrapped V-belts are commonly replaced as a set when a drive carries more than one belt. Check the sheave grooves for wear and the belt for cracking or glazing before ordering, so the replacement goes onto a drive that is ready for it.
Dimensions
- Section
- C
- Length
- 2438mm
Frequently asked questions
- How do I confirm the P-C96 is the right belt?
- Check the marking on the belt being replaced. The P-C96 is a C profile belt, 22 mm top width, 14 mm height, 40 degree angle, 2438 mm length. If the old belt matches those figures, it is the same size.
- What should I send to request a quote?
- Send the part number P-C96 by WhatsApp or email. If you do not have the number, send the profile, the length and a description of the drive, and the team will confirm the belt or suggest an equivalent.
- Should I replace more than one belt at a time?
- On a multi-belt drive, belts are normally replaced as a set so they share the load evenly. Inspect the sheave grooves at the same time.