V-belt Movendis P-C97
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C97 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C97 and any equivalents.
The Movendis P-C97 is a classical wrapped V-belt in a C profile, 2464 mm long, 22 mm top width, 14 mm high, 40-degree angle. Before you fit a replacement, inspect the drive for worn sheaves or misalignment that can shorten belt life. We carry this belt and quote by part number through WhatsApp or email.
A new belt on a worn drive will not run correctly. Check sheave grooves for wear, rust or embedded debris, and confirm the sheaves are aligned and the correct width for a C profile belt. Measure the old belt's outside length against the 2464 mm figure and note the part number from the back of the belt.
The P-C97 is a classical wrapped V-belt, not a narrow wedge or cogged design. Its 22 mm top width and 14 mm height fit standard C-section sheaves. If the drive shows heavy dusting, glazing or uneven wear, correct the cause before installing the replacement.
Send the part number P-C97, the belt marking and a photo of the drive if you need help confirming the fit. Our team replies promptly and can check the profile and length against your application.
Dimensions
- Section
- C
- Length
- 2464mm
Frequently asked questions
- What should I check before replacing a C-profile V-belt?
- Inspect sheave grooves for wear or debris, verify alignment, and confirm the sheave section matches the belt's 22 mm top width and 14 mm height. Worn sheaves can damage a new belt quickly.
- How do I confirm the P-C97 is the right length?
- Check the marking on the back of the old belt and measure its outside length. The P-C97 is 2464 mm long, so compare that figure with your old belt before ordering.
- What information do you need for a quote?
- Send the part number P-C97 and the belt marking. If you are unsure, include a photo of the drive and the old belt so we can help confirm the profile and length.