V-belt Movendis P-C94.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C94.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C94.5 and any equivalents.
The Movendis P-C94.5 is a classical wrapped V-belt in the C profile. It measures 2400 mm in length, with a 22 mm top width, 14 mm height, and a 40-degree angle. This page helps you match it to the belt being replaced.
To confirm the P-C94.5 is the correct belt, start with the marking on the back of the old belt. Compare the profile letter and the length against this belt's C profile and 2400 mm length. Then check the cross-section: a C profile belt has a 22 mm top width and a 14 mm height, so a worn belt should still measure close to those dimensions if it has not swollen or compressed.
Also verify the included angle. This belt is built at 40 degrees to seat correctly in the pulley groove. If the old belt is stretched, glazed, or missing its marking, measure the outside length and the top width with a caliper and send those numbers with your request.
Send the part number P-C94.5, the profile, and the length you measured by WhatsApp or email. If the old marking is unreadable, a photo of the belt and the pulley groove helps us confirm the right replacement.
Dimensions
- Section
- C
- Length
- 2400mm
Frequently asked questions
- What do I need to send to get a quote for this belt?
- Send the part number P-C94.5, or the profile and length from the old belt. If the marking is gone, include the measured top width and outside length.
- How do I check that this C profile belt matches the one I am replacing?
- Compare the profile letter and the length on the back of the old belt to the C profile and 2400 mm length of the P-C94.5. Confirm the top width is 22 mm and the height is 14 mm.
- Can you help if the old belt marking is unreadable?
- Yes. Send a photo of the belt and the pulley groove, along with the measured length and top width. We will help confirm the correct belt.