V-belt Movendis P-C276
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C276 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C276 and any equivalents.
The Movendis P-C276 is a classical wrapped V-belt in the C profile with a length of 7000 mm. It measures 22 mm across the top, 14 mm in height and has a 40-degree angle. Use these dimensions to match it against the belt you are replacing.
Start by checking the belt currently on the drive. A classical wrapped V-belt carries its profile and length on the back; if the old belt is worn or the marking is gone, measure the top width, height and outside length and compare them to the P-C276 figures above. The C profile and 7000 mm length are the two identifiers that keep the belt seated correctly in the pulley groove.
Width and height matter as much as length. A belt that is too wide sits proud of the groove and slips; one that is too narrow bottoms out and loses grip. The P-C276 is 22 mm wide and 14 mm high, with a 40-degree angle, so confirm the pulley groove accepts those dimensions before ordering.
If you are unsure whether the P-C276 is the correct replacement, send the part number from the old belt, or the drive make and model, along with the measured profile and length. Our team can confirm the match and suggest an equivalent when needed.
Dimensions
- Section
- C
- Length
- 7000mm
Frequently asked questions
- How do I confirm the P-C276 fits my drive?
- Compare the C profile, 7000 mm length, 22 mm top width, 14 mm height and 40-degree angle against the belt you are replacing. If the old belt is unmarked, measure it and send those figures for confirmation.
- Can you help if the old belt number is different?
- Yes. Send the part number stamped on the old belt, or the drive details and measured dimensions. We will check it against the Movendis P-C276 and suggest an equivalent if needed.
- What should I include in a quote request?
- Send the part number P-C276, the quantity, and any details from the belt being replaced. If you are matching by size, include the profile, length, top width and height.