V-belt Movendis P-C274.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C274.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C274.5 and any equivalents.
The Movendis P-C274.5 is a classical wrapped V-belt in the C profile. It measures 6972 mm in length, with a 22 mm top width, 14 mm height and a 40° angle. This page covers how to read the marking on your old belt and use it to confirm the correct replacement.
When you find the marking on the back of the old belt, compare it directly with the P-C274.5. The profile is C, the length is 6972 mm, the top width is 22 mm, the height is 14 mm and the angle is 40°. If those values match what is molded or printed on the belt you are replacing, this is the correct part number to quote.
If the marking is worn or unreadable, use the drive as the reference. Measure the outside length and check the cross-section against the profile and dimensions above. Because this is a classical wrapped V-belt, it is common to replace all belts on the same drive at the same time, so note the quantity you need.
To request a quote, send the part number P-C274.5, the quantity, and the marking from the old belt if you have it. If the marking points to a different profile or length, send that information as well and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 6972mm
Frequently asked questions
- How do I confirm the Movendis P-C274.5 matches my old belt?
- Read the marking on the back of the old belt. It should show the C profile and the 6972 mm length. The P-C274.5 has a 22 mm top width, 14 mm height and 40° angle.
- What should I send to request a quote for this belt?
- Send the part number P-C274.5 and the quantity you need. If you have the old belt, include the marking from the back so the team can confirm the profile and length.
- Can I replace just one belt on a drive?
- On many classical V-belt drives, belts are replaced as a set so they wear evenly. Note how many belts the drive uses and include that quantity in your request.