V-belt Movendis P-C280
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C280 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C280 and any equivalents.
The Movendis P-C280 is a classical wrapped V-belt with a C profile and a length of 7112 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, or embedded debris. A worn groove lets the belt sit too deep, which reduces grip and can cause slip or heat buildup. Measure the groove width and compare it to the belt's 22 mm top width and 14 mm height. Confirm the sheaves are aligned and the shafts are parallel; misalignment shortens belt life and can roll the belt out of the groove.
Verify the drive's guard and tensioning hardware move freely. The P-C280 has a 40° angle, so the belt must sit with its sidewalls contacting the groove flanks, not the bottom. Clean the grooves, check for oil or coolant contamination, and replace any sheave that is badly worn. Once the drive is sound, fit the belt and tension it according to your maintenance practice.
The Movendis P-C280 is a classical wrapped V-belt in the C profile, 7112 mm long. When you request a quote, send the part number P-C280 and confirm the profile and length you need. If you are replacing more than one belt on a multi-belt drive, note the quantity so the set can be matched.
Dimensions
- Section
- C
- Length
- 7112mm
Frequently asked questions
- What should I check on the sheaves before fitting the P-C280?
- Inspect the grooves for wear, rust, and debris. Confirm the belt's 22 mm top width and 14 mm height sit correctly in the groove, and check alignment and tensioning hardware.
- How do I identify the P-C280 on the belt?
- Look for the part number P-C280 on the back of the belt. The profile is C and the length is 7112 mm.
- What information do you need to quote the P-C280?
- Send the part number P-C280, the quantity, and confirm the C profile and 7112 mm length. If you are replacing a set, include the number of belts on the drive.