V-belt Movendis P-C149.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C149.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C149.5 and any equivalents.
This Movendis P-C149.5 is a classical wrapped V-belt in profile C, with a length of 3800 mm. It is used on industrial drives where a classical cross-section and a long center distance are required. Confirm the replacement by matching the profile and the length marked on the old belt.
The belt measures 22 mm across the top, 14 mm in height and has a 40-degree angle. Its profile and length determine fit on the drive. Before ordering, read the marking on the back of the old belt and compare the profile letter and length to this page. A belt that is too short or too long will not tension correctly, and a different profile will not sit properly in the pulley groove.
Classical wrapped V-belts are common on fans, pumps, compressors, conveyors and other general industrial drives. When replacing, inspect the pulleys for wear, alignment and debris, and check the drive for damaged or seized components. If several belts run together, replace them as a set so they share the load evenly.
If you have the part number, send it by WhatsApp or email for a quote. The team can help confirm the right belt or suggest an equivalent. You can also send a photo of the marking on the old belt, along with the profile and length, if the number is not readable.
Dimensions
- Section
- C
- Length
- 3800mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the back of the old belt. The profile should be C and the length should match 3800 mm. Also confirm the top width of 22 mm and height of 14 mm if you can measure the old belt.
- What should I send to request a quote?
- Send the part number P-C149.5, or a photo of the belt marking. If the number is not readable, send the profile, length and any other dimensions you can measure.
- Can MR help if I am not sure about the size?
- Yes. The team can help confirm the right belt or suggest an equivalent. Send the details you have by WhatsApp or email.